Position Control System

The PCS system accepts a 0-10 VDC or 4-20 mA analog command signal.  This signal is used by the PCS to move the actuator's rod or rotational shaft to move to and hold a specific position. The PCS is designed to control any pneumatic Bimba position feedback cylinder, including PFCN, PFCNL, PFC, PFCL, and PTF series actuators.

  • Operating Pressure:  70 to 80 PSI
  • Reverse polarity and overvoltage protected
  • Flow rated models:  0.02Cv, 0.04Cv, 0.08Cv, 0.10Cv, 0.11Cv, 0.25Cv
  • Options:  No enclosure, quick connect
  • Requires 24V DC Power
  • Generates 10V DC to energize resistive probe


How to Order

Pressure Rating:  70 to 80 PSI
Temperature Range:  0° F to 100° F
Maximum average velocity without over-shoot:
2-6.5 in/sec* actuator/load specific
Maximum Payload:  360 lbs. (@ average velocity)