The CDF Series vacuum pump efficiently generates a high vacuum flow and a high exhaust flow using a small amount of compressed air, with amplification ratios up to 40:1 (output to input). CDF's are ideal for applications that require high levels of flow such as the rapid evacuation of fumes, blow drying wet materials, or to cool hot areas and/or materials. CDFs generate high vacuum flow, overcoming leaks inherent in handling porous objects such as cardboard, foam or fabric.
- Field adjustable for individual applications
- High performance – 40:1 amplification ratio
- Holds porous materials securely
- Easy to install – compact & lightweight
- Efficient – Instant response, minimal energy required
- Safe operation: No heat generated, control output pressure, no bursting
To order the CDF Series Air Amplifiers, click here.
How to Order
The model number for the CDF Series of Adjustable Air Amplifiers consists of the base model acronym (CDF 500H, e.g..) plus three a]lphanumeric clusters. These clusters designate the optional exhaust port threads, silencer, and the optional body material. Refer to the chart below for an example of model number CDF 500H-EPT100-ST16FC. This is a CDF 500H pump with minimum bore of 0.50" and optional EPT100 exhaust port threads and optional ST16FC silencer. Please note exhaust port threads are required for attaching a silencer. The final cluster refers to optional body material such as 304 stainless steel. For more information on the custom materials, refer to these CDF catalog pages.
Additional Specs
CDF Series Air Amplifier / Blower Standard Specifications
Pump Material: Anodized Aluminum (for silencer material see Silencer Page)
Medium: Filtered (50 micron) un-lubricated, non-corrosive dry gases
Operating Temperature:-100° to ~400°F [-73° to ~204°C]
Operating Pressure: Variable – For maximum performance, Bimba recommends 50 PSI [3.4 bar] and above
CDF Series Air Amplifier / Blower Operating and Installation Requirement
Model : CDF 200, 200H, 375H CDF 500H, 750H, 750HFM, 1000H, 1500H, 2000H
Supply Line: 1/4” I.D. [4mm] tube 3/8” I.D. [10mm] tube
Control Valve: Minimum orifice 0.125” [3mm] Minimum orifice 0.250” [6mm]