Products

Multi-Stage Cartridge with Holder

The C-MS Series multi-stage cartridges are a high-performance low-cost vacuum cartridge that can be easily integrated into OEM solutions. The C-MS Series can be used with a customer supplied holder or upgrade to our C-CH Series which includes a threaded cartridge holder.

  • High performance with 27 different performance levels allowing you to maximize the performance while minimizing air consumption
  • Vacuum levels up to 28" Hg [948 mbar] to hold parts tight
  • Higher vacuum flow with less air consumption
  • Lightweight & Compact makes it easy to integrate
  • Installs close to the work piece for a quick response

How to Order

 

 

Operation

Threaded Cartridge Pump Standard Specifications

Cartridge Material:Standard: Anodized Aluminum, Buna-N O-rings
Optional Materials:Stainless Steel, PVC, Peek, Teflon®, Delrin®
O-rings available in additional materials - Consult factory for availability
Medium:Filtered (50 micron) un-lubricated, non-corrosive dry gases
Operating Temperature:-30° to ~250°F [-34° to ~121°C]
Operating Pressure:80 PSI [5.5 bar] or 60 PSI [4.1 bar] – Consult Factory for other operating pressures

  
Mid Series Threaded Cartridges Operating and Installation Requirements

Cartridge Size: C60 (M, H)-TH and C90 (L, M, H)-THC100 (L, M, H)-TH and C150 (L, M, H)-TH

Supply Line:1/4” O.D. [6mm] tube3/8” O.D. [10mm] tube

Vacuum Line:1/4” O.D. [6mm] tube3/8” O.D. [10mm] tube

Vacuum Line Filtration: Typically vacuum filters are not required, if desired Bimba recommends model VF125LPM (see In-Line Filter Page)


Max Series Threaded Cartridges Operating and Installation Requirements

Cartridge Size: C200 (L, M, H)-THC250 (L, M, H)-TH

Supply Line:3/8” O.D. [10mm] tube3/8” O.D. [10mm] tube

Vacuum Line:3/8” O.D. [10mm] tube3/8” O.D. [10mm] tube

Vacuum Line Filtration: Typically vacuum filters are not required, if desired Bimba recommends model VF375LPM (see In-Line Filter Page)

 
Max Series Threaded Cartridges Operating and Installation Requirements

Cartridge Size: C300 (L, M, H)-THC350 (L, M, H)-TH

Supply Line:1/2” O.D. [12mm] tube1/2” O.D. [12mm] tube

Vacuum Line:1/2” O.D. [12mm] tube1/2” O.D. [12mm] tube

Vacuum Line Filtration: Typically vacuum filters are not required, if desired Bimba recommends model VF500LPM (see In-Line Filter Page)