Products

Multi-Stage Vacuum Pump

Bimba's MSV Series Multi-Stage Vacuum Pumps offer the advantage of high flow rates with lower air consumption. These pumps provide the best mix of performance, size, and air consumption with our Min, Mid, and Max Series options available.

  • High productivity with vacuum levels up to 28" Hg [948 mbar] to hold parts tight
  • Threaded cartridges are easily replaced to change performance
  • Compact size makes MSV ideal for end of arm tooling
  • 37 Different performance levels available across three body sizes

How to Order

How to Order

How to Order

 

 

 

 

Operation

Threaded Cartridge Pump Standard Specifications

Cartridge Material:Standard: Anodized Aluminum, Buna-N O-rings
Optional Materials:Stainless Steel, PVC, Peek, Teflon®, Delrin®
O-rings available in additional materials - Consult factory for availability
Medium:Filtered (50 micron) un-lubricated, non-corrosive dry gases
Operating Temperature:-30° to ~250°F [-34° to ~121°C]
Operating Pressure:80 PSI [5.5 bar] or 60 PSI [4.1 bar] – Consult Factory for other operating pressures

 
Performance Level Designations:

 “L”0-10”Hg, [0 to 339mbar] for low vacuum/high flow applications (not available for Min Series)

M”0-20”Hg, [0 to 677mbar] for medium vacuum/high flow applications

H”0-28”Hg, [0 to 948mbar] for high vacuum/standard flow applications

 
Mid Series Threaded Cartridges Operating and Installation Requirements

Cartridge Size: C60 (M, H)-TH and C90 (L, M, H)-THC100 (L, M, H)-TH and C150 (L, M, H)-TH

Supply Line:1/4” O.D. [6mm] tube3/8” O.D. [10mm] tube

Vacuum Line:1/4” O.D. [6mm] tube3/8” O.D. [10mm] tube

Vacuum Line Filtration: Typically vacuum filters are not required, if desired Bimba recommends model VF125LPM (see In-Line Filter Page)


Max Series Threaded Cartridges Operating and Installation Requirements

Cartridge Size: C200 (L, M, H)-THC250 (L, M, H)-TH

Supply Line:3/8” O.D. [10mm] tube3/8” O.D. [10mm] tube

Vacuum Line:3/8” O.D. [10mm] tube3/8” O.D. [10mm] tube

Vacuum Line Filtration: Typically vacuum filters are not required, if desired Bimba recommends model VF375LPM (see In-Line Filter Page)

 
Max Series Threaded Cartridges Operating and Installation Requirements

Cartridge Size: C300 (L, M, H)-THC350 (L, M, H)-TH

Supply Line:1/2” O.D. [12mm] tube1/2” O.D. [12mm] tube

Vacuum Line:1/2” O.D. [12mm] tube1/2” O.D. [12mm] tube

Vacuum Line Filtration: Typically vacuum filters are not required, if desired Bimba recommends model VF500LPM (see In-Line Filter Page)